Barco SIM 5H, Owner'S Manual

Page: 62 / 173

7. Advanced
4. Use ↑ or ↓ to select Passive In fi tec
5. Press → to pull down the menu
6. Use ↓ or ↑ to select ON
Image 7-29
7. Press ENTER to select.
When passive In fi tec TM is set to ON , the passive In fi tec TM fi lter will be inserted into the light path of the projector.
7.3 Image fi les
Overview
• Introduction to Image fi les
• Load fi le
• Forced fi le load
• Auto Image
• Edit fi le
• Save as (create a custom fi le)
• Rename fi le
• Copy
• Delete
7.3.1 Introduction to Image fi les
Image fi les
An image fi le contains the main characteristics of a source (number of active lines,...). The projector’s memory contains a list of fi les
corresponding to the most common sources : standard fi les.
When a new source corresponds to one of these fi les, a custom fi le is created. The custom fi le is automatically saved if a setting is
altered (contrast, ...). The Save as... function allows to create and save a custom fi le.
The active fi le can always be edited in order to fi t exactly the source speci fi cations.
AutoImage creates automatically the best suited image fi le (custom fi le) for a new source. AutoImage is used
when :
- a new source is detected: AutoImage creates a new custom fi le which can always be edited if necessary.
- the AutoImage is launched via the button on the RCU, the projector’s OSD or from the desktop’s OSD
File notation
The notation of the image fi le happens as follows :
/Standard/SXGA+@60.xml
Type of file : standard or custom
Resolution
Vertical freq
file extension = xml
Image 7-30
58 R59770247 SIM 5H 04/06/2008