Barco SIM 5H, Owner'S Manual

Page: 29 / 173

4. Installation
The DVI OUT is connected in the same way, but to the DVI OUT connector of the projector
4.5.8 PC
PC connection
A RGB signal can be connected through a DB-15 connector (VGA connector).
How to connect a PC signal ?
1. Connect the VGA connector to the projector’sDB—15 input
4.5.9 Communications
4.5.9.1 Network connections
What can be done ?
The projector can be connected to a network allowing it to be accessed from any connected network device. The Ethernet connec-
tion can be used to upload/download projector software and/or to set up communication (TCP/IP protocol) with the projector. This
network can be a local area network or a small dedicated network
Following operations are made possible :
• fi le transfer for fi rmware upgrade
• easy adjustment of projector
• storage of multiple projector con fi gurations and set ups.
• wide range of control possibilities.
• linking the projectors to allow uniform color (Linked Dynacolor) and brightness (CLO) ,...
• ...
The connection to the projector can be done via a crossed cable or via a HUB on the local network (LAN).
How to connect the projector ?
1. Connect the RJ 45 male plug to the projector’s RJ 45 female connector
R59770247 SIM 5H 04/06/2008 25