Barco SIM 5H, Owner'S Manual

Page: 23 / 173

4. Installation
How to remove the Lens?
1. Support the lens with one hand.
2. The lens lock handle is located on the front side of the projector, slide this handle to the right.
Image 4-7
The lens lock handle is located on the front side of the projector, slide this handle to the right.
3. Remove the lens out of its housing.
4. Slide the lens lock handle back to the left.
4.3 Cleaning the lens
To minimize the possibility of damage to optical coatings, or scratches to lens surfaces, we have developed
recommendations for cleaning. FIRST, we recommend you try to remove any material from the lens by blowing
it off with clean, dry deionized air. DO NOT use any liquid to clean the lenses.
Necessary tools
Toraysee
TM
cloth (delivered together with the lens kit). Order number : R379058.
How to clean the lens ?
Proceed as follow :
1. Always wipe lenses with a CLEAN Toraysee
TM cloth.
2. Always wipe lenses in a single direction.
Warning: Do not wipe back and forwards across the lens surface as this tends to grind dirt into the coating.
3. Do not leave cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.
4. If smears occur when cleaning lenses, replace the cloth. Smears are the fi rst indication of a dirty cloth.
C
AUTION
:
Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the
cloth.
Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.
R59770247 SIM 5H 04/06/2008 19