Barco SIM 5H, Owner'S Manual

Page: 25 / 173

4. Installation
4.5.1 Power connection
Power speci fi cations
Power input range: 90V - 254V AC / 50–60Hz
Power consumption: 680W
Power cord connection
Use the supplied power cord to connect the projector to the wall outlet. Plug the female power connector into the male connector at
the front left side of the projector.
4.5.2 Connections overview
Connections Overview
The following table gives an overview of the available connections found on the front panel :
8
6
1
9
5
7
3
2
4
Image 4-9
Connections overview
Source Input Connections
1 5-BNC Cable Input
2
Composite video
3 S-Video
4 DVI
5 VGA D15 connector
6 DVI IN
9 DVI out
Communication Connections
7 RS232 In
8
10/100 Base-T In
Table 4-1
Connections overview
4.5.3 Composite video
Composite video connection
A Composite video signal is often available on a yellow cinch connector of a Camera, VCR or DVD player, in this case you will need
an adapter cable cinch/BNC to connect to Video input of the RGB board.
How to connect a composite video signal ?
1. Connect the BNC connector to the projector’s BNC video input
R59770247 SIM 5H 04/06/2008 21