12. Warping
How to adjust the overlap zone (white level adjustment)
1. Click on the up down control of the spin box of the selected blending zone and adjust until the desired
zone is reached
Or,
click in the input
fi
eld of the spin box of the selected blending zone and enter the desired value.
The result is indicated in the ScenergiX preview pane. The corresponding line will move in the selected
direction.
When
Show alignment lines
is checked, the zone indication is shown on the screen. The corresponding
zone will move in the direction of the adjustment.
Use Reset to set all overlap zones back to zero (0).
How to adjust the black level
1. Click on the slider an move this slider to the desired position.
Or,
click on the up down control of the spin box of the selected color until the desired value is reached.
Or,
click in the input
fi
eld of the spin box of the selected color and enter the desired value.
Adjust the black level of area A until the black level of area A, B and C are equal. (image 12-12)
A
C
B
Image 1
Image 2
Image 12-12
ScenergiX, black level adjustment
When
Link
is checked, R, G and B are adjusted at the same time.
12.2.6 Corner Manipulation
Adjusting via the preview window
1. Click on a red corner button, hold down the mouse button and drag the corner to desired place. (im-
The coordinates of the selected corner change accordingly.
2. Repeat for the other corners in the same way.
R59770513 RLM W-SERIES 28/07/2010
113
Summary of Contents for RLM W Series
