![background image](http://html1.mh-extra.com/html/barco/r9828870/r9828870_instruction-manual_4243734013.webp)
BARCO 13
Projection Systems
Fixing the pull belts on the projector support
What has to be
done
After the projector is slided onto the projector support, proceed to fixing the pull belts of
the motor unit on the projector support.
Necessary Tools
Spanner 18mm
Fixating the pull
belts
To fix the pull belts of the motor unit on the projector support, follow the next procedure:
Step
Action
1- Place the projector, slided on the support, (A) under the mounted motor unit (B).
2- Unroll the belts (C) via let down motor operation until the top of the belt reaches
the projector support.
3-
The ends of the belts are already provided with a locked loop. Line up each
loop with the respective bracket on the support. Open the loop, insert a bolt
M12 (D) through the bracket and loop, and secure with a nut M12 (E).
4- Put a nut M12 (F) on each rod, a few centimeter from the top (used later for
securing the projector support).
A
B
C
D
E
F