Barco R9010100, Owner'S Manual

Page: 57 / 137

6. Adjustment Mode
6.3.4.3 Correct value
What is already available during start up?
During the installation of a fi le with LOAD, the horizontal period, the total number of vertical lines are automatically measured and
fi lled out in the menu table. These values will be available when starting up the EDIT procedure of an active fi le.
C
AUTION
:
Do not adjust these settings on an active fi le, they are used to identify the input source fi le.
How to fi nd the correct values for the item in the Edit fi le menu?
Horizontal Total Pixels If the value for "Horizontal Total Pixels" is wrong, sampling mistakes (small vertical bars in the
projected image) will be seen in the image.
Select "Total" and adjust the pixel quantity. Adjust for zero bars.
hint: if the number of bars increase, adjust in the other direction.
Active Pixels The "Active Pixels" : determine the width of the window on the screen. This value is normally given in
the source speci
fi cations. If not, adjust until full image is displayed (no missing pixels).
Horizontal Start number of pixels between the start of the sync signal and the start of the video information.
Horizontal Period already fi lled in with the correct value when active fi le.
Vertical Total Lines already fi lled when an active fi le is selected to be edited
Vertical Active Lines number of horizontal lines determining the height of the projected image. This value is normally given
in the speci
fi cation of the source. If not, adjust until full image height is displayed (no missing lines)
Vertical Start number of lines between the start of the sync pulse and the start of the video signal.
Hor. Total pixels
Active pixels
Hor. Pulse width
Hor. Start
Vert. Total lines
Active lines
Vert. Pulse width
Vert. Start
Hor. line
Frame
Image 6-1
Input settings
R5976690 XLM H25 25/05/2009 53