Barco R9010100, Owner'S Manual

Page: 54 / 137

6. Adjustment Mode
The adjustment mode menu will be displayed. (menu 6-2)
MAIN
Select a path from
below :
ADJUSTMENT MODE
INSTALLATION
SERVICE
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-1
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
WINDOW ADJUSTMENT
LAYOUT ADJUSTMENT
SCENERGIX
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-2
6.3 File Service
Overview
• Possible fi le manipulations
• Start up
• Load fi le
• Edit fi le
• Rename
• Copy
• Delete
• File Options
6.3.1 Possible fi le manipulations
Connecting a new source.
Before using a new source, a correct fi le has to be installed. The projector’s memory contains a list of fi les corresponding to the most
used sources. When the new source corresponds with one of these fi les, the fi le can be loaded and saved for future use. When
there is a little difference, the fi le can also be loaded and then edited until the source specs are reached.
Possible fi le Manipulations
The following fi le manipulations are possible :
• Load : installation of a fi le for a new source.
• Edit : editing a loaded fi le to the source specs.
• Rename : renaming a fi le.
• Copy : copying a fi le.
• Delete : deleting a fi le
• Options : manual / automatic
File attributes
Each fi le can have a ’read’ or ’read-write’ attribute.
The following situation can be found on the menus:
• r— : fi le is read only.
• rw- : fi le has a read-write attribute and can be edited.
6.3.2 Start up
Start up
To enter the File Service , handle as follow :
1. Push the cursor key ↑ or ↓ to highlight File Service . (menu 6-3)
2. Press ENTER to select.
50 R5976690 XLM H25 25/05/2009