Barco R9010100, Owner'S Manual

Page: 42 / 137

4. Getting Started
No. Key name Description
2 MENU Menu key, to enter or exit the menus.
3 Address key
(recessed key), to enter the address of the projector (between 0 and 9). Press the recessed
address key with a pencil, followed by pressing one digit button between 0 and 9.
4 LOGO key Lens adjustment key
5 PAUSE to stop projection for a short time, press ’PAUSE’. The image disappears but full power is
retained for immediate restarting.
6 STBY standby button, to start projector when the power switch is switched on and to switch off the
projector without switching off the power switch.
Attention : Switching to Standby. When the projector is running and you want to go
to standby, press the standby key for 2 seconds.
7
TEXT to deactivate or activate the on screen dialog boxes and menus.
8 AUTOIMAGE not used
9 Digit buttons direct input selection.
10 Lens control use these buttons to obtain the desired ZOOM, SHIFT, FOCUS.
11 VOL Not used
12 Picture controls use these buttons to obtain the desired picture analog level.
13 DIGI ZOOM not used
14 FREEZE press to freeze the projected image.
15 PIP not used
16 ENTER to con fi rm an adjustment or selection in the MENU.
17 Cursor keys Cursor Keys on RCU or on the local keypad : to make menu selections or to access the
menu bar.
18
BACK to leave the selected menu or item (go upwards to previous menu).
19 EFFECTS not used
20
PIP ADJUST
window select
21 RC operating indication lights up when a button on the remote control is pressed. (This is a visual indicator to
check the operation of the remote control)
38 R5976690 XLM H25 25/05/2009