RLM W14 17/04/2017
64
11.Alignment
Adjust Lines
When the function is ON, there will be adjust lines on the image in order to easily adjust multiple images. Press
on
the remote control to adjust the position of the lines on the image.
The image below is an example if 2 projectors are projecting at the same image.
1. Horizontally place two projectors and have the two projected images with an overlap area and use the focus/zoom
and lens shift functions with test grid pattern to set a proper overlap area for blending with a matched grid size.
2. Color matching 2 projectors on white is done with P7 (R.G.B.C.M.Y.W) adjust in projector toolset.
3. Brightness matching 2 projectors can be done with the lamp power(Refer to adjustment by dimming the projector with
higher lumens.
4. Use ScenergiX-> White level to set the blending size based on the overlap region size.
Use ScenergiX-> Black level position to adjust the start position of black level compensation.
Use ScenergiX-> Black level to raise the brightness of non-overlap zone such that the brightness of the overlap zone and
non-overlap zone are matched for black level.
Note1: Please note that the following allowable warp, blanking and ScenergiX combination
based on the underlying chip specification
Note2: ScenergiX / 4 corner combination is available when black level is not adjusted.
Note3: Blend along corners is available when black level is not adjusted.
Black Level Black Level
Black Level
Keystone Rotation Pin/Barrel 4-corner blanking Top/Bottom or
Left/Right only Blend along corners Black Level
Keystone
X
X
X
X
X
X
X
Rotation
X
X
X
X
X
X
X
Pin/Barrel
X
X
X
X
X
X
X
4-corner
X
X
X
OK
OK
OK
X
blanking
X
X
X
OK
OK
OK
OK
Top/Bottom or
Left/Right only
X
X
X
OK
OK
OK
Blend along corners
X
X
X
OK
OK
X
X
X
X
X
OK
OK
X
ScenergiX
Sc
ene
rg
iX
White Level
White Level
Summary of Contents for R9006332B1
Page 1: ...RLM W14 User manual...
Page 92: ......