RLM W14 17/04/2017
10
2.General
It is mechanical possible to shift outside the recommended field of view, but it will result in a decline of
image quality depending on the used lens and the zoom position of the used lens. Furthermore, shifting
too much in both directions will result in a blurred image corner.
Best image quality is projected in the On-Axis configuration.
Horizontal and vertical projector tilt ranges
Avoid to reduce the usage of lamp life. Suggest the projector rotated and mounted vertical angle not > ±15°.
Side to side tilt, however, must not exceed ±10°. This limit ensures that the lamp in the projector operates properly and safely.
MAX
A
MAX
MAX
MAX
10°
±15°
±15°
10°
A
B
C
A
Tilting allowed without problems
B
No tilting allowed in this area
C
No tilting allowed in this area
10°
10°
A
2.5 Lens Selection
Procedure:
1. Determine the required screen width(SW).
2. Determine the approximate position of the projector in the room.
3. Start up the Lens Calculator on the Barco website:
http://www.barco.com/en/tools/lenscalculator
to determine the
possible lenses for your configuration. As a result the Lens Calculator window opens.
The Lens Calculator can also be used to determine the position of the projector when the lens type and
screen width is known.
Due to lens tolerances the results of calculated values may be different from measured values. These
difference may vary +/-5%
Summary of Contents for R9006332B1
Page 1: ...RLM W14 User manual...
Page 92: ......