Downloaded from Projector.com
Service Mode
8-3
5976197 BARCOCINE 7 10012001
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
COMMON ADDRESS : 0
BARCO LOGO
Proj. address : 001
Soft. Version : 6.00
Config. : Ceiling
Front
Baudrate PC : 9600
Text : ON
Serial No. : 103589552
CINE 7
How to start up ?
To select Identification :
1. Push the cursor key
é
or
ê
to highlight Identification (menu 1).
2. Press
ENTER
to select.
The identification screen will be displayed (menu 2).
menu 1
menu 2
Total Run Time
What can be displayed ?
The total run time since the first start up can be displayed.
Note
All projectors leave the factory after a burn-in period of approximately 100 hours.
How to start up ?
To select Total Run Time :
1. Push the cursor key
é
or
ê
to highlight Total Run Time (menu 1).
2. Press
ENTER
to activate.
The amount of time the projector has played since its first start up at the factory will be displayed in a text box (menu 2).
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
COMMON ADDRESS : 0
BARCO LOGO
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
menu 1
RUN TIME
110 h
menu 2
Change password
What can be done ?
The password code (4 digits) can be changed to a new one.
This item is password protected. First the actual password should be entered before continuing.
Note
Password function is only active if the jumper on the controller is in the 'ON' position.