7-20
5976066 BARCOCINE 7 07022000
Random Access Adjustment Mode
Select with or
then <ENTER>
<EXIT> to return.
CONVERGENCE
Select with or
then <ENTER>
<EXIT> to return.
GREEN ONLY
RED ON GREEN
BLUE ON GREEN
9
8
5
4
1
2
3
6
10
18
7
15
22
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
CONVERGENCE
SEL : select area
using
arrow keys
ADJ : adjust area
using
arrow keys
Toggle between
SEL and ADJ
with <ENTER>
<ENTER> continue
<EXIT> to return
CONVERGE
ADJUSTMENT
70
red image
green image
14
16
17
12
20
11
13
19
21
24
23
25
Convergence Adjustment
What has to be done ?
Convergence adjustments affect both the horizontal and vertical lines of the setup pattern. These adjustments are performed on
the red image while superimposed on the green image and then on the blue image while superimposed on the green image. The
screen is devided into 25 areas (image 1)
Note
The green convergence adjustments can be added as an option. When these are available, start always with 'green only'. This option
will also be indicated on the convergence menu.
Adjustment order
Adjust first the 'green only' when available and continue with red on green and blue on green.
Start up
1.
Push the cursor key
é
or
ê
to select desired adjustment.
2.
Press ENTER to activate.
How to adjust ?
1.
Use the cursor keys to move the box to the desired zone.
2.
Press ENTER to begin the convergence adjustment.
Start the convergence adjustment with zone one and continue as mentioned in the image 1.
3.
Use the cursor keys to make horizontal or vertical convergence adjustments in the selected zone (image 2).
4.
Press ENTER to move to another zone.
5.
Press EXIT to return to the convergence menu.
menu 1
menu 2
image 1
menu 3
image 2
image 3