Service Mode
8-11
5976066 BARCOCINE 7 011299
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Green convergence mid
What can be done ?
The green convergence settings can be set to midposition.
Only available when the projector is equipped with green convergence adjustments.
How to set Green settings to midposition ?
1. Push the cursor key
é
or
ê
to highlight 'GR Convergence Mid' (menu 1).
2. Press ENTER to select.
A confirmation screen will be displayed first (menu 2).
3. Press ENTER to confirm.
Press EXIT to cancel the procedure to set the green convergence settings to their midposition.
GR CONVERGENCE MID
Convergence settings
in current block
will be overwritten !
<ENTER> to confirm
<EXIT> to cancel
menu 2
menu 1
Undo green convergence mid
What can be done ?
'Undo Gr convergence mid' is displayed in the Memory management menu in stead off 'Gr convergence mid' when this latter is pressed.
Only available when the projector is equipped with green convergence adjustmentes.
When "Gr convergence mid" is selected, all green convergence settings are set to their midposition.
How to undo ?
1.
Push the cursor key
é
or
ê
to highlight 'Undo Gr convergence mid' (menu 1).
2.
Press ENTER undo.
Select with
é
or
ê
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
UNDO GR CONVERGENCE MID
menu 1
Common Settings
What can be done ?
Within the common settings menu, the following items can be set up or executed :
- G2 adjustment
- CRT run in cycle
- Projector warm up
- Memory banks : on/off