Barco R9002380, Owner'S Manual

Page: 18 / 82

Connections
2-6 5976066 BARCOCINE 7 011299
COMM PORT
(800 peripherals)
REMOTE
S VIDEO
S-VIDEO
Professional VCR Audio amplifier
R G(S) B
R- Y Y( S) B -Y RS232 OUT RS232 IN
RGB3S or RG3sB input selection
a. Press digit button 4 on the RCU or
b. With the local keypad :
(to gain access to the local keypad, see 'Local keypad' in chapter 'getting Started'.)
1.
Press ADJUST key, the General access menu is displayed on the screen (menu 1).
2. Use the cursor keys to highlight 4.
3. Press ENTER to display the source.
menu 1
GENERAL ACCESS
Select with ,
or
then <ENTER>.
<EXIT> to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
5 6
3 4
1 2
Enter ADJUST
Connecting a Component source.
(R-Y)Y(B-Y) analog input terminals with sync input or with sync on the luminance (Y) input. The projector detects automatically where
the sync signal is located.
Line doubling or multipling is possible for component video input sources on standard line frequency.
Note :
If a line doubler or line multiplier is built in, the default position of this line doubler (multiplier) soft option is ON (active). The video input
signal will be displayed as a non interlaced image (= improved image stability).
To enable or to disable this function, enter the adjustment mode and change the position of the ON/OFF toggle switch (see chapter
'Random access' adjustment mode).
(R-Y)Y(B-Y)S or (R-Y)Ys(B-Y) input selection
a. Press digit button 5 on the RCU or
b. With the local keypad :
(to gain access to the local keypad, see 'Local keypad' in chapter 'getting Started'.)
1.
Press ADJUST key, the General access menu is displayed on the screen (menu 1).
2. Use the cursor keys to highlight 5.
3. Press ENTER to select the highlighted source.
GENERAL ACCESS
Select with ,
or
then <ENTER>.
<EXIT> to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
5 6
3 4
1 2
Enter ADJUST