Service Mode
11-5
5975207 BARCOGRAPHICS 9100 081196
The following baud rates are available :
- 9600
- 4800
- 2400
- 1200
- 600
- 300
- 150
- 75
The actual baud rate will be highlighted. To change the baud rate,
push the control stick forward or backward and press
ENTER
to
accept the new baud rate setting.
Reset Lamp Runtime
Reset lamp run time is only allowed when a new lamp is installed.
Highlight Reset Lamp Run Time by pushing the control stick forward
or backward and press
ENTER
to select.
When Reset Lamp Run Time is selected in the Service Mode
selection menu, the following warning will be displayed :
Risk of electrical shock. Reset lamp run time is reserved to qualified
service personnel.
If you are not qualified, press
EXIT
to cancel the reset operation.
Select with or
<ENTER> to accept
<EXIT> to return.
CHANGE BAUDRATE PC
9600
4800
2400
1200
600
300
150
75
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
DIMMING
MORE
WARNING
-----------------------------------------------------
RISK OF
ELECTRICAL SHOCK
______________________________________________________________
RESET LAMP RUN TIME
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
DIMMING
MORE...
LAMP RUNTIME HISTORY
Serial No
Runtime
-----------------------------------------------------
>
0111121
600 h
0110031
750 h
0110010
745 h
-----------------------------------------------------
<EXIT> to return
Lamp Run Time History
To get an overview of the different lamp run times, highlight Lamp
Run Time History by pushing the control stick forward or backward
and press
ENTER
.
A listing with the lamp serial number and the corresponding run time
will be displayed.
The actual installed lamp will be marked.
Press
EXIT
to return to the service mode selection menu.
Dimming
Not yet available.
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
DIMMING
MORE...