Installation Mode
10-4
5975207 BARCOGRAPHICS 9100 081196
Blue on green convergence.
Use the control stick to highlight Blue on green and press
ENTER
to
display the Blue on green test pattern.
Repeat the same procedure as for Red on green lines but read blue
when red is indicated.
Select with or
then <ENTER>
<EXIT> to return.
CONVERGENCE
GREEN
BLUE ON GREEN
RED ON GREEN
HATCH
Select with or
then <ENTER>
<EXIT> to return.
CONVERGENCE
GREEN
BLUE ON GREEN
RED ON GREEN
HATCH
To check the result of the convergence adjustments, highlight Hatch
and press
ENTER
. A hatch pattern will be displayed on the screen.
ENTER
: displays a hatch pattern.
EXIT
: returns to the installation menu.
ADJUST
: exits the adjustment mode.
All lines must be displayed in white, if not so repeat the convergence
adjustment procedure.
Configuration
Highlight "Configuration" by pushing the control stick forward or
backward and press
ENTER
to select.
For more information, see Projector configuration in chapter Installa-
tion Set Up.
Select with or
then <ENTER>
<EXIT> to return.
INSTALLATION
INPUT SLOTS
CONVERGENCE
CONFIGURATION
INTERNAL PATTERNS
Select with or
then <ENTER>
<EXIT> to return.
INSTALLATION
INPUT SLOTS
CONVERGENCE
CONFIGURATION
INTERNAL PATTERNS
INTERNAL PATTERNS
OUTLINE
COLOR BARS
MULTIBURST
CHECKER BOARD
PURITY
Select with or
then <ENTER>
<EXIT> to return.
Internal Patterns
The projector is equipped with different internal patterns which can
be used for measurment purposes.
Highlight "Internal Patterns" by pushing the control stick forward or
backward and press
ENTER
to display the Internal Pattern selection
menu.
The following test pattern are available :
- Outline (not yet available)
- Color Bars
- Multiburst
- Checker Board
- Purity
Each pattern (except Purity) can be inverted by pressing
ENTER
.
To return to the normal pattern, press
EXIT
.
