Unpacking and Dimensions
2-1
5975207 BARCOGRAPHICS 9100 081196
27.1
1125.7
630
42
2.
18
70
20
8.
6
150
702.3
42
50.3
135.2
284.25
568.5
468.2
Center of gravity
2
UNPACKING AND DIMENSIONS
Unpacking
To open the banding, pull on the clip as shown in the first drawing.
Take the projector out of its shipping carton and place it on a table.
For transportation, the projector is mounted on a wooden board with 3 bolts. Use a 13 mm wrench to
remove these bolts.
When using the projector as a table mounted configuration, always mount the 3 supporting feet by
turning in into the provided holes (see drawing below).
Warning : To prevent overheating of the projector as table mounted, always remove the wooden board
and turn in the 3 supporting feet to allow air circulation via the built-in dust filter at the bottom.
1
2
3
4
5
3 7 9
Save the original shipping carton and packing material, they will
come in handy if you ever have to ship your projector. For maximum
protection, repack your projector as it was originally packed at the
factory.
Contents of the shipped box :
- 1 BARCOGRAPHICS 9100 (weight ± 88 kg)
- 1 remote control unit RCU + 9V battery
- 1 power cable with outlet plug type CEE7.
- 1 owner’s manual
- 3 supporting feet
Projector dimensions
(units : mm)
(*) More info about lenses, see
appendix B
Name lens
(*)
HD(1.2:1)
HD(2.2:1)
HD(3.3:1)
HD(4.0:1)
HD(5:1)
HD(7:1)
HD(1.5-3:1)
HD(3-5.3:1)
Some examples of lenses :
Pull
To open