manualshive.com logo in svg

Barco R9001140, Owner'S Manual

Share
Download
Barco R9001140 Owner'S Manual Download Page 32

Random Access Adjustment Mode

9 - 6

5975207 BARCOGRAPHICS 9100 081196

Delete

To delete a selected file out of the list of files.
Use the control stick to select DELETE and press 

ENTER

.  The

delete selection menu will be displayed.

Select with        or

then <ENTER>

<EXIT> to return.

DELETE FILE

Filename

Src Resolution

-----------------------------------------------------
pal         .s01

1

675x278i

pal         .c01

1

675x278i

secam   .s03

3

675x278i

[All]
-----------------------------------------------------
Active file : pal.c50

Select with        or

<ENTER> to accept

<EXIT> to return.

CONFIRM

DELETE FILE

Delete file:

pal.c01?

<ENTER> to confirm

<EXIT> to return

FILE SERVICE

LOAD

EDIT

RENAME

COPY

DELETE

OPTIONS

Push the control stick forward or backward to select a file and press

ENTER

.

If [All] is selected, your password has to be entered before all files will
be deleted.

A confirmation menu "Delete file 'file name'?" is displayed.  When you
want to delete the file, press 

ENTER

.  If you do not want to delete the

file, press 

EXIT

.

Note : the active file cannot be deleted.

File Options

Use the control stick to select OPTIONS and press 

ENTER

.  The

option selection menu will be displayed.

Select with        or

then <ENTER>

<EXIT> to return.

FILE SERVICE

LOAD

EDIT

RENAME

COPY

DELETE

OPTIONS

FILE OPTIONS

FILE SORT [NAME]

Select with        or

then <ENTER>

<EXIT> to return.

Press ENTER to toggle between [name] and [index]
[name] : The files in the file list will be sorted on the file name.
[index] : The files in the file list will be sorted on the file extension.

Picture Tuning

Highlight Picture Tuning by pushing the control stick forward or
backward and press 

ENTER

 to select.

The Picture Tuning menu will be displayed.
The next items are available :

- sync slow/fast
- still video
- color balance
- gamma

Select with        or

then <ENTER>

<EXIT> to return.

RANDOM ACCESS

ADJUSTMENT MODE

FILE SERVICE

PICTURE TUNING

GEOMETRY

PICTURE TUNING

SYNC [SLOW]

STILL VIDEO [ON]

COLOR BALANCE

GAMMA

Select with        or

then <ENTER>

<EXIT> to return.

Summary of Contents for R9001140





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands