4. Installation
4.2.4
Disconnection and reconnection of a DC power cable / hard display reboot
Connection/disconnection of a DC power cable is only allowed when the entire display wall
is OFF!
There is no possibility to switch off a dedicated power module19inch, that’s why the entire display wall needs to
be switched off.
Use the Green ONOFF button of the 19inch rack to switch off the wall, or use the command
Standby
on the web
interface of the Green BCM Box:
Please note that switching a panel to idle (push button on the panel) or switching the wall
to idle (button in BCM client application) is NOT sufficient.
Only disconnect a DC power cable when the wall is in StandBy.
Barco – Green BCM Solution – R591346 – user's manual – Revision 04– November-2016
____________________________________________________________________
36
