5. Network setup
The Barco Wall Control Manager software enables communication to the WALL network via the CLIENT interface.
The Client interface comes with the fixed IP address 192.168.10.1 and is set for manual configuration. For con-
trolling the display wall, please refer to the user manual of Barco Wall Control Manager software.
Connect the LAN interface labeled WALL to the LAN switch of the display wall. The WALL interface is configured as
DHCP server and has the fixed IP address 172.29.1.1. Provided the displays feature still their default settings
(DHCP enabled), they will receive an automatic IP address from the Green BCM Box
Connect the LAN interface labeled CLIENT to the operator workstation connected to the customer’s LAN.
In case the displays, Green BCM Box and the operator workstation are an independent network no more interac-
tion is required.
Make sure to use cables with shielding of
type S-FTP or S-STP
Assurez vous d'utiliser des câbles avec un
blindage de type S-FTP ou S-STP.
Connect one or all of the switch controls: LAN, IR, push button.
LAN1 of the display is connected to the WALL interface of the Green BCM Box! This is the
only supported configuration!
A display MUST NOT be connected via LAN1 to WALL interface of Green BCM Box and via
LAN2 to CLIENT interface of Green BCM Box!
A display MUST NOT be connected via LAN1 to WALL interface of one Green BCM Box and
via LAN2 to WALL interface of a second Green BCM Box!
In case you think of additional ways of connecting a display be aware that these are NOT
supported!
Barco – Green BCM Solution – R591346 – user's manual – Revision 04– November-2016
____________________________________________________________________
38