Barco Orion 1080, Safety And Users Manual

Page: 22 / 70

22
4.8 Lens shift
Most of the Orion projection lenses can shift horizontally and vertically. However, some lenses, typically
wide angle lenses (on-axis type) have very little shift range.
Lens shift is motorized. To activate Lens Shift press the OK button on the keypad and then use the arrows on the
remote or keypad to shift the lens.
To use the RS-232 or LAN control interfaces, please refer to the relevant SIS (Simplified Instruction Set) commands
available for download on www.barco.com
4.9 Lens planarity (Scheimpflug adjustment)
This adjustment is rarely needed, do not apply it unless it is required.
Certain applications require fine adjustment of the lens planarity in order to obtain an image that is focused. The
projector is fitted with three adjustment screws (Allen key 3 mm/5 mm) around the bayonet mount that facilitate
a Scheimpflug adjustment. Do not attempt adjusting without the required technical competence and refer to the
service manual found on our web for further info.
Figure 4-6. Scheimpflug Adjustment Screws