Barco Orion 1080, Safety And Users Manual

Page: 35 / 70

35
5.6 Picture main menu
Picture menu adjustments are global and stored independently of source. The exception is 2D/3D where profiles
are stored individually.
profile: A selection of predefined profiles with different attributes: standard, presentation, bright, video,
cinema, DICOM, SRP, custom, advanced (only available if enabled from service menu). If the
profile is marked by an asterisk (*), this indicates that the original settings have been changed.
RealColor: Barco’s proprietary color management suite. See RealColor sub menu.
gamma : 10 predefined gamma curves:
Film 2.2: Exponential 2.2 curve
Film 2.4: Exponential 2.4 curve
Film 2.6: Exponential 2.6 curve
Film 2.8: Exponential 2.8 curve
Video 1: Relaxed S-shape
Video 2: Increase S-shape
Computer 1: Steep S-shape
Computer 2: Very steep S-shape
Dynamic: Increase S-shape
DICOM 180 Lux: Curve shape depending on type of color wheel used. Further DICOM
curves are shown in menu profile
lamp power:
Adjustment of lamp power between 280-350W
profile reset: Resets any entered profiles, either current or all, to default
brightness: Electronic image brightness. Range -50 to +50
contrast: Electronic image contrast. Range -50 to +50
saturation: Electronic image saturation. Range -50 to +50
aspect: Aspect ratio of image scaling. 5 options:
Fill aspect ratio: Fills the imaging device in horizontal and/or vertical direction to main the input
image aspect ratio.
Fill all / 16:9 / 4:3: Fills the entire imaging device regardless of input aspect ratio and resolution.
One-to-one: Shows input image mapped pixel-by-pixel without scaling on the imaging device.
advanced: Advanced features. See Chapter 5.6.2.
reset: Restore picture settings to factory default.
source information: Detailed information about the acquired source.