Barco Nio Fusion12MP User Manual Download Page 58

Page: 58 / 66

R5913350 /02

Nio Fusion 12MP

Indicates the device is approved according to the PSE regulations.

Indicates the device is approved according to the RCM regulations.

Indicates the device is approved according to the EAC regulations.

Caution: Federal law (United Stated of America) restricts this device to sale by or on
the order of a licensed healthcare practitioner.

IS 13252 (Part 1)

IEC 60950-1

R-xxxxxxxx

www.bis.gov.in

Indicates the device is approved according to the BIS regulations.

Indicates the device is approved according to the INMETRO regulations.

Indicates the USB connectors on the device.

Indicates the DisplayPort connectors on the device.

Indicates the legal manufacturer.

Indicates the manufacturing date.

Indicates the temperature limitations

for the device to safely operate within specs.

Indicates this is a Medical Device.

Indicates the device serial number.

REF

Indicates the device part number or catalogue number.

UDI

Indicates the Unique Device Identifier.

Important information

Values for xx and yy can be found in the technical specifications paragraph.

Summary of Contents for Nio Fusion12MP



































































Search results

Summary of Contents for Nio Fusion12MP

Reviews:

Related manuals for Nio Fusion12MP

Brands by name

Popular brands

Barco Nio Fusion12MP, User Manual

Search results

Summary of Contents for Nio Fusion12MP

Reviews:

Related manuals for Nio Fusion12MP

Brands by name

Popular brands