Barco Nio Fusion12MP, User Manual

Page: 13 / 66

13 R5913350 /02 Nio Fusion 12MP
USB
DOWN
USB DOWN
(SIDE)
USB
UP 1
USB
UP 2 DP IN 1 DP IN 2 AC IN
Image 2 – 2
Power on the display system
1. Set the power switch next to the mains power input connector in position “ I ” .
2. Press the jog dial to activate your display.
3. Switch on the workstations connected to your display.
Your display will be running in a basic video mode at a default refresh rate when first time starting up.
Install the MXRT driver and Intuitive Workflow Tools
When using a Barco MXRT display controller, install the MXRT driver and Intuitive Workflow Tools on the
connected workstation. Barco ’ s Intuitive Workflow Tools are designed to increase visibility of subtle details,
improve focus during reading sessions, and accelerate workflow.
1. Download the latest MXRT driver and Intuitive Workflow Tools from www.barco.com/mxrt.
2. Install the MXRT driver and Intuitive Workflow Tools as described in the Barco “ Display Controller and
Intuitive Workflow Tools ” user guide on the included documentation CD, or at www.barco.com/support .
2.2 Dual workstation setup with KVM switch
About
In this setup, the display is connected to two different workstations, each with one DisplayPort cable. When
connecting a USB cable from your display to each of the two workstations, you can control both workstations
with a single keyboard and mouse connected to the display. Switching the video and controls signals between
the two workstations is done with the KVM switch operated via the OSD menu.
USB
DisplayPort
USB
DisplayPort
USB
Image 2 – 3
With only one DisplayPort cable to drive the image, full 12MP resolution is possible but only at a
limited refresh rate of 45 Hz (because of bandwidth limitations of the DisplayPort 1.2 standard). This
may affect the smoothness of panned images and somewhat limits the speed that cine images can
be displayed.
Installation and setup