Barco Nio 5MP System Manual Download Page 9

Page: 9 / 110

Safety Instructions

System manual Nio 5MP

Safety Instructions

General Recommendations
Read the safety and operating instructions before
operating the apparatus.

Retain safety and operating instructions for future
reference.

Adhere to all warnings on the apparatus and in the
operating instructions manual.

Follow all instructions for operation and use.

Electrical shock

Usage in Hazardous locations
Equipment not suitable for use in the presence of a
flammable anesthetic mixture with air or with oxygen or
nitrous oxide.

Power connection
•

Power requirements: The apparatus must be
powered using the 12 VDC power supply that is
supplied with the apparatus.

•

The 12 VDC power supply must be powered by the
AC mains voltage.

Summary of Contents for Nio 5MP















































































































Search results

Summary of Contents for Nio 5MP

Reviews:

Related manuals for Nio 5MP

Brands by name

Popular brands

Barco Nio 5MP, System Manual

Search results

Summary of Contents for Nio 5MP

Reviews:

Related manuals for Nio 5MP

Brands by name

Popular brands