Display operation
70
System manual Nio 5MP
Locking and unlocking user controls
The User Controls function allows to disable or enable
the control wheel functions.
When user controls are disabled, you cannot:
•
display and use the on-screen display
•
switch the display in stand-by mode
To disable user controls:
1. Turn the control wheel to display the on-screen
display. The Main Menu appears.
2. Turn the control wheel to select Settings.
3. Click the control wheel to enter the Settings menu.
4. Turn the control wheel to select User Controls.
5. Click the control wheel to switch from “On” to “Off”.
6. Exit the menus and save the changes.
To enable user controls:
1. Do not use the control wheel for at least 3 seconds.
2. Turn the control wheel 1 step clockwise.
3. Click the control wheel 2 times.
4. Turn the control wheel 1 step counterclockwise. The
on-screen display appears.
Note: Steps 2 to 4 must be performed in maximum 3
seconds.
SETTINGS
DPMS
On
Power LED
On
User Controls On
EXIT
Summary of Contents for Nio 5MP
