Barco MDSC-8255 12G, User Manual

Page: 45 / 72

45 R5913964 /00 MDSC-8255
5.3.13 Picture in Picture position
About Picture in Picture position
The available Picture in Picture positions for your display are:
• Bottom right
• Top right
To select Picture in Picture position
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the PiP Position submenu.
4. Select one of the available PiP positions and confirm.
5.3.14 Picture in Picture transparency
About Picture in Picture transparency
The available Picture in Picture transparencies range selectable for your display is between:
• 0: No transparency
• 10: Maximum transparency (roughly 37%)
To select Picture in Picture mode
1. Bring up the OSD main menu.
2. Navigate to the
Input Select menu.
3. Enter the PiP transparency submenu.
4. Select one of the required PiP transparency value and confirm.
5.4 Configuration menu
5.4.1 Information
About information
The available information items for your display are:
• Model (commercial type identification)
• SW package (display firmware identification)
• Main board release (hardware and firmware identification)
• MNA release (firmware identification) (MNA only)
• Eth1 Main (IP address of Main ethernet (1) port of the monitor) (MNA only)
• Eth2 2nd (IP address of 2nd ethernet (2) port of the monitor) (MNA only)
• Keyboard release (hardware and firmware identification)
• SDI module release (hardware and firmware identification)
• Serial Number (unit serial number)
• Main FPGA release (firmware identification)
To access information
1. Bring up the OSD main menu.
2. Navigate to the
Configuration menu.
3. Enter the Information submenu.
5.4.2 Language
About languages
The OSD menu of your display is available in multiple languages.
Advanced operation