Barco MDSC-8255 12G, User Manual

Page: 37 / 72

37 R5913964 /00 MDSC-8255
5.2.2 Latency
About latency
The video latency is defined as the delay between the time of a monitor input video transition to the
corresponding light output transition on screen.
The available latency modes for your display are:
• Diagnostic: Best picture quality (with enhanced noise reduction filter)
• Surgical: Lowest latency, optimized for fast moving images
To select the latency mode
1. Bring up the OSD main menu.
2. Navigate to the
Picture Advanced menu.
3. Enter the Latency submenu.
4. Select one of the available latency modes and confirm.
5.2.3 Input range
About input range
This command sets the signal range of the inputs. Suggest to set the input range according to the input signal
range.
The available input ranges are:
• 0 – 255
• 16 – 235
• 16 – 255
• AUTO
The input range control “ AUTO ” is available only when the selected main source (see “ Main source
selection ” , page 30) is different from DVI or SDI.
To select the input range
1. Bring up the OSD main menu.
2. Navigate to the
Picture Advanced menu.
3. Enter the Input range submenu.
4. Select one of the available input ranges and confirm.
5.2.4 Input color format
About input color format
This command sets the signal color format of the inputs. Suggest to set the input color format according to the
input signal (
“ AUTO ” setting will follow the input metadata).
The available input color formats are:
• YUV 4:4:4
• YUV 4:4:2
• RGB
• AUTO
The input color format command is available only when the selected main source (see “ Main source
selection ” , page 30) isDP or SDI 4K.
To select input color format
1. Bring up the OSD main menu.
2. Navigate to the
Picture Advanced menu.
3. Enter the Input color format submenu.
Advanced operation