Barco MDCG-5121, User Manual

Page: 17 / 49

3. Display installation
5. Plug the mains connector of the external DC power supply to a grounded power outlet by means of
the supplied power cable.
3.5 Routing the cables
To route the cables
1. Route the cables alongside the neck and in the cable ducts in the tilt & swivel foot.
2. Re-attach the connector compartment cover and neck cover. Close the cable duct covers. Push the
cable duct covers upwards to lock them.
To route the cables on a dual foot
If the display is mounted on the system dual tilt & swivel foot, cables are best routed behind the arms and
through the cable channel in the foot shaft, as shown in the pictures below.
B4100592 CORONIS 5MP 05/08/2014 15