Barco MDCG-5121, User Manual

Page: 18 / 49

3. Display installation
3.6 First time starting up
Overview
You are now ready to start up your Coronis 5MP for the fi rst time.
1. Switch on your Coronis 5MP as described in "Standby switching", page 18.
2. Turn on the computer connected to your display.
If you have properly installed your display and display controller, the Windows start-up messages will
appear once the boot procedure is
fi nished.
Your Coronis 5MP will be running in a basic video mode at a default refresh rate when
fi rst time starting up. If you are using a Barco display controller, please consult the user
guide delivered with it to install the drivers, software and documentation. When this
is done, your display will automatically detect the connected video input signal(s) and
apply the correct video mode and refresh rate.
16 B4100592 CORONIS 5MP 05/08/2014