Barco LCD Display, Getting Started Manual

Page: 54 / 80

Driver and Software Installation
54
Figure 17: Barco MXRT Driver Removal Wizard (driver version may be different than what is
pictured)
Note: Vista Only:
After uninstalling the driver, shutdown the
machine and remove the card. If you leave the card in the
system, Vista will automatically reinstall the driver.
If you are uninstalling the Barco MXRT drivers prior to doing a
driver upgrade, complete the Barco MXRT Driver Removal Wizard
as described, and reboot the system into Safe Mode. From Safe
Mode, run the Program Files\Barco\ MXRT_DriverCleaner batch
file to remove any remaining files. Then you can reboot into
regular Windows mode to install the new driver.
Command line (Silent) Install of Drivers and Software
(Not supported with Windows Vista)
Specifying the silent install option causes most of the GUI associated
with the installer to disappear. A background progress window will
still be visible, but no user input will be required.
The silent install behavior is dictated by the
SETUP.INI
file. Each
application is allowed to have separate command-line parameters for
normal and silent installs.