7-3
General Menu
5976367 BARCO IQ-G300 24092001
Standby Timer
Standby Timer
If there is no signal, and the standby timer is enabled, the projector will shut down after a determined time.
The countdown time can be set in a dialog box in a range from 300 to 3600 seconds.
The Timer can also be disabled.
How to enable the Timer ?
1 Press
MENU
to activate the Toolbar
2 Use
è
to select the
General
item
3
Press
ê
to pull down the
General menu(menu 4)
4
Use
é
or
ê
to select the
Standby Timer item
5 Press
ENTER
to activate the function
On the screen appears a dialogbox (Image 1)
6
Use
é
or
ê
to select
Enabled , a black box surrounds the selected item
, press
ENTER
to activate
7
Use
é
or
ê
to browse to the input field
8
Use
ç
or
è
, the numeric keys on the remote or the keypad to change the countdown setting
9
Press
MENU
or
BACK
to exit or to go back to the previous menu
note:
When the standby timer is triggered (no timer enabled) a dialogbox is displayed showing the countdown time
Identification
Projector's identification screen
The identification screen displays the projector's main characteristics.
How to display the identification screen ?
1 Press
MENU
to activate the Toolbar
2 Use
è
to select the
General
item
3
Press
ê
to pull down the
General menu
4
Use
é
or
ê
to select the
Identification item
5 Press
ENTER
to activate the function (menu 4)
On the screen appears now a textbox (image 2)
6
Press
MENU
or
BACK
to exit or to go back to the previous menu
0
Countdown to
6WDQGE\WLPHU
sec
Disabled
Enabled
,GHQWLILFDWLRQ
Type IQ-G300
Address 0
Software version 1.00
IQ present no
Serial number 0000001
menu 3
Image 1
menu 4
Image 2
No signal available
Projector will go to standby
300
0HVVDJH