10-2
Signal Menu
5976367 BARCO IQ-G300 24092001
Switching Mode
Switching from one source to another ?
To minimize undesired effects when switching from one source to another one can use the Seamless switching mode, beside
Seamless switching there is a wide choice between several effects which render the transitions more enjoyable.
How to select a switching mode ?
1 Press
MENU
to activate the Toolbar
2 Use
è
to select the
Signal
item
3 Press
ê
to Pull down the
Signal
menu
4 Press
è
to pull down the
Switching mode
menu (menu 1 )
5 Use
é
or
ê
to select the desired mode
6 Press
ENTER
to confirm (menu 1)
A black bullet shows the active mode
Note on fade in/out
The Fade in/out effect can not be performed when switching from DATA1 to VIDEO1 (or inversely) or from DATA2 to VIDEO2 (or
inversely).
Background
What will happen ?
If there is no signal connected to the projector, the background will be a logo, a black or a blue screen depending on the settings in
this menu.
Changing the background
1 Press
MENU
to activate the Toolbar
2 Use
è
to select the
Signal
item
3 Press
ê
to Pull down the
Signal
menu
4 Press
ê
to select
No signal
5 Press
è
to pull down the
No signal
menu (menu 2)
6 Use
é
or
ê
to select the desired background
7 Press
ENTER
to confirm
A black bullet shows the active configuration
Note on logo display
The logo display is only possible in the full screen mode, a logo can thus not be displayed in a window in the PiP mode.
Note on signal presence
When there is no signal connected, the projector will also start its standby timer countdown if enabled (see General Menu) and shuts
down after the predetermined time.
menu 1
menu 2
