7. Step-By-Step Configuration
-
Select loudspeaker group
Stereo P.A.
-
Select
Panning
in
Algorithm Selection
-
In
Settings
keep
Level Correction
on and
Geometry Mode
2D (Ring)
,
Delay Correction Mode
Speaker Distance
selected
-
In
Slot Settings
uncheck the
Source Traits
dialog
Note:
For geometry mode, select the option that comes close to your loudspeaker group. If you’re not sure select Auto 2D/3D.
The delay correction mode has two options - Speaker Distance and Source Distance:
-
Speaker Distance
is optimized for ring shaped speaker groups.
-
Source Distance
is optimized for planar shaped speaker groups.
9. Go to tab
Render Slot 3
-
Select loudspeaker group
Surrounds
-
Select
Panning
in
Algorithm Selection
-
In
Settings
keep
Level Correction
on and
Geometry Mode
2D (Ring)
,
Delay Correction Mode
Speaker Distance
selected
-
In
Slot Settings
check the
Source Traits
dialog
10.Go to tab
Render Slot 4
-
Select loudspeaker group
Subwoofer
-
Select
Panning
in
Algorithm Selection
-
In
Settings
keep
Level Correction
on and
Geometry Mode
2D (Ring)
,
Delay Correction Mode
Speaker Distance
selected
-
In
Slot Settings
set
LF Speaker Extension
to
ON
for all loudspeaker groups
Note:
Selecting the LF speaker extension enables bass management in the system for the selected loudspeaker groups.
11.Go to tab
Output Routing
Note:
In the matrix, the rows represent the loudspeakers of your loudspeaker setup that are assigned to render slots, each with
an individual color. The columns represent physical audio outputs of the processor, which can be accessed at the rear
of your IOSONO COREhardware. You may con
fi
gure your individual output routing here. In our example,
- speakers 1-15 in render slot 1 are connected to outputs 1-15 (dummy speakers 16 and 17 require no connection to
physical audio outputs),
- speakers 1-4 in render slot 2 are connected to outputs 18-21,
- speakers 1-2 in render slot 3 are connected to outputs 22-23 and speakers 1-5 in render slot 4 are connected to outputs
24-28.
Therefore we want to use the automatically con
fi
gured diagonal 1-to-1 routing.
7.1.3.2
Scene Designer
To con
fi
gure the scene designer
1. In Preset Details go to Scene Designer in the tree structure on the left
-
Create 16 sources by clicking the
Add
button (according to your inputs from the mixing console)
-
Name the sources by double clicking on each source’s name label in the source list and type in the name with respect to the
input channels (e.g. follow a naming scheme from your mixing console, for example sub mixes of microphone groups)
-
Arrange the sources in a way that re
fl
ects the stage settings or other situations you wish to create (for more information about
the Scene Designer, "Scene Designer", page 28) (image 7-3)
Note:
The sources have been arranged to represent the spot microphone positions of individual instrument groups in a classical
orchestra body along with two sources representing reverb generator returns placed around the audience for creating
arti
fi
cial reverb sounds.
2. For Channel 15 and 16 check Dialog in Source Traits
-
Increase
Spread
to about 30% for both sources (image 7-4)
Note:
Selecting
Dialog
in
Source Traits
assigns these sources to render slot 3 / surrounds and 4 / subwoofer, because of the
source trait setting made in render slot 3 and 4. Spread values higher than zero will increase the number of speakers
involved to reproduce the source when using Panning algorithms.
3. To quickly access different source position arrangements for different static scenes do the following in
Snapshots
-
Press
Save
-
1
for
fi
rst arrangement, rearrange sources
-
press
Save
-
2
-
Switch between
1
and
2
4. In the main window, turn down the Volume to
-inf
with
-
in the top right corner
-
Click
Run
in the top left corner.
Note:
The button as well as green status lights of audio I/O control and processing should get a green halo.
5. Go to Audio
I/O Control
and press the
Status
-Icon
-
Turn up the Volume with
+
in the top right corner of the main window
-
The amplitude of the level meters in
Processing
and
Output
will rise with increasing volume if the IOSONO CORE processor
is fed with input signal. These output signals will become audible
36
R5906746 IOSONO CORE 08/05/2017
Summary of Contents for Iosono Core R9801500
