6. Control Unit
6.2.4
Services
Image 6-4
General signal and scene data
fl
ow between sservices
6.2.5
Service Settings And Service Status
Due to the modularity of the Control Unit each service has not only its own con
fi
guration page, but also displays information about
its status in the currently running preset in a separate view. When no preset is running, only the settings tab is displayed. When a
preset is running, the preset details can be toggled between settings tab and status tab on each service page.
Image 6-5
Settings and status tab buttons
6.2.6
I/O Control
The
I/O Control
service handles the physical routing and synchronization options of the IOSONO CORE. Typically, the con
fi
guration
of this service is started by automatically selecting the number and type of installed soundcards of the IOSONO CORE by clicking
the
Autodetect
button. Further the synchronization source can be selected.
If
Signal
is selected as the synchronization source, the incoming signal at the primary soundcard will be the
determined synchronization source. The primary sound card is AES 1 in AES and AES / MADI systems and
MADI 1 in MADI only systems.
The physical inputs and outputs of the soundcard(s) are connected to the processing service as shown in
fi
gure 19 in "Touchscreen
Interface & Easy Control", page 8 In addition to the standard outputs, parallel direct-out paths can be created in the
Advanced
26
R5906746 IOSONO CORE 08/05/2017
Summary of Contents for Iosono Core R9801500
