Barco Iosono Core R9801500, Installation And User Manual

Page: 16 / 65

5. Initial System Configuration
- Keep Type Rectangle
- Name your group, e.g. Ring
- Click OK to con fi rm (image 5-3)
4. Back in main window: in Group Type keep Multilayer checked, keep default Width and Length in Dimensions and type 1.5m
in Height (value describes the absolute installation height of the speakers’ acoustical center above ground).
5. Loudspeakers
- Front: 7
- Rear: 5
- Left: 7
- Press > between Left and Right for Right to copy the entered date from Left
6. Create a new group with + in Groups
- Choose Type Surface from the drop down menu
- Name your group, e.g. Ceiling
- Press OK to con fi rm (image 5-4)
7. Keep Multilayer checked and type in Surface Height 3m (value is the absolute height of this group above ground). Add 4 more
lines by proc 4 times
-
Type in line 1: Loudspeakers 4
- Line 2: Loudspeakers 3
- Line 3: Loudspeakers 4
- Line 4: Loudspeakers 3
- Line 5: Loudspeakers 4
- Distance X keep default value ( 1m ) for line 1 - 5
- Distance Y type 1.5m for line 1 - 5
8. Create a new group with + in groups
- Keep Type Rectangle
- Name your group, for example Subwoofer
- Click OK to con fi rm
9. Check Subwoofer in group type
- Dimensions: Height 0.5m (value describes the absolute installation height of the speakers’ acoustical center above ground)
- Loudspeakers - Front 2 , Left/Right Spacer 1.5m
- Rear 1 , Right Spacer 2.5m (with a dimensions width of 5m the rear subwoofer will be half-way of the width in the rear center)
10.Press OK to create the loudspeaker fi le
Note: Using this tool you can create many different loudspeaker fi les, including standard setup types such as 2.0, 5.0, 7.0 as
well as multilayer setups, simply by adding more groups with different height values. The layers will be automatically
organized in ascending order based on their average height information.
11.The 3D ls fi le is displayed in layers at Options menu (left: top view, right: fi le name). Choose the layer to be displayed using the
drop-down menu Loudspeaker Group. Figure 5.5 visualizes the loudspeaker setup previously created with the Setup Designer.
(image 5-5)
12.De fi ne Zones to ensure correct reproduction of zone objects, the corresponding zones need to be de fi ned in the loudspeaker
setup. Zones can be de fi ned individually for each loudspeaker setup as a property of the speci fi c setup.
Make sure you are at menu System - Options - Loudspeaker Setups
- Select the loudspeaker setup in which you want to de fi ne Zones
- Click on Edit
- Click on the Zone mode Icon in the lower left corner
- Click on Zone Assignment
- Select the loudspeaker(s) for the fi rst assignment
- From the right list, select the Zone ID you want the selected loudspeakers to be assigned to
- Repeat until at least on loudspeaker is assigned to each of the desired Zones
- When you have fi nished with Zones de fi nition, exit the edit mode by clicking Edit again.
Note: Multiple loudspeakers can be selected by holding shift+click or cmd+click
Note: Loudspeakers can be assigned to Multiple Zones in case several Zone Objects should be reproduced by the same loud-
speaker. For example the Zones left surround and left back surround need to be reproduced using a single loudspeaker
present left to venue.
13.Press Export to save your loudspeaker setup fi le for backup purposes
- Create a new directory in the Export dialog using the icon Folder. As an example name it to Ls Files and save your loud-
speaker fi le to the directed folder as fi lpee type *.ls4
Note: Save your fi le as fi le type *.ls3 for being compatible with previous system generations such as the IPC100. Some features
exclusive to the IOSONO CORE will not be contained to *.ls3
12 R5906746 IOSONO CORE 08/05/2017