Barco ILite, Installation Manual

Page: 57 / 110

7. Basic setup procedures
Image 7-23
4. Close the two safety clamps, of the rental tile below, as illustrated.
Note: The rental tile will slightly tilt to the rear, which is normal.
Image 7-24
5. Release the two latches, of the rental tile below, by sliding the tilt clip away from the latch. Ensure that each latch is completely
hooked over the latch receiver. It’s now safe to release the ILite rental tile.
1
2
Image 7-25
6. Secure the rental tile sideways with the adjoining rental tile by rotating the handle of the side locking mechanism 360º clockwise.
Caution: Never use adverse force to lock the mechanism.
R5976189 ILITE RENTAL DISPLAY 16/09/2005 53