Barco ILite, Installation Manual

Page: 28 / 110

5. ILite rental peripherals and accessories
5.2 ILite rental base stand setup accessories
Base stand setup accessories
To set up an ILite rental display in a base stand configuration additional mounting accessories are required as there are the foot
beams, the ILite rental foot and the ILite rental stacker. These accessories are easy to install with a minimum of tools. ILite rental
tiles are built upon ILite rental feet. The rental foot is mounted upon two foot beams. Depending on the height of the ILite display
longer foot beams must be used. One stacker profile captures a height of three ILite rental tiles. The maximum height of a base
stand ILite rental display is 12 tiles high.
Two sizes of ILite rental feet are available. Namely the “ILite dual rental foot” and the “ILite triple rental foot”. The dual rental foot
covers a width of two ILite tiles and the triple rental foot covers three tiles. The ILite rental foot has the same locking mechanism as
the ILite rental frames.
A
D
E
F
G
H
J
K
L
K
M
M
M
Q
P
B C
Image 5-6
A Foot beam of 1,2 meter.
B Foot beam of 2,4 meter.
C Foot beam of 4 meter.
D Rental foot spacer plate.
E
Rental foot adjustment plate.
F Rental foot base rails.
G Dual rental foot.
H Triple rental foot.
J
Stacker profile.
K Base rails for stacker foot.
L Stacker foot.
M Stacker mushrooms for positioning stacker profile.
P
Stacker locking key.
Q Spring cotters to secure locking key.
24 R5976189 ILITE RENTAL DISPLAY 16/09/2005