7. Advanced
7.5.7
Manual gain control
What can be done ?
Beside the AGC there is the possibility to manually set the gain of the incoming video signal. When the AGC is enabled (ON), the
manual setting does not affect the gain, AGC must therefore be disabled. The manual gain control must be done on an external
pattern with white areas (grey scale bar pattern)
How to set the Manual Gain Control ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select the
Image
item
3. Press
↓
to Pull down the
Image
menu
4. Use
↑
or
↓
to select
Manual Gain Control
Image 7-43
5. Press
ENTER
A scroll bar is displayed
Image 7-44
6. Use
←
or
→
, the numeric keys on the remote, or the keypad to change the gain so as to obtain homogeneous white parts in the
image.
7.6
Lamp management
Overview
•
•
•
•
•
•
7.6.1
Runtimes
How to display the runtimes ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select the
Lamp
item
3. Press
↓
to Pull down the
Lamp
menu
4. Use
↑
or
↓
to select
Runtimes
62
R59770079 BARCO ID H250/500 23/07/2007
Summary of Contents for iD H250
