![background image](http://html1.mh-extra.com/html/barco/id-h250/id-h250_owners-manual_4180871071.webp)
7. Advanced
A lamp failing to startup will be noticed by a low light output of the projector since the projector goes in single
lamp mode.
In case of a lamp error contact the local Barco authorized technician
How to clear the lamp error ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select the
Lamp
item
3. Press
↓
to Pull down the
Lamp
menu
4. Use
↑
or
↓
to select
Clear lamp error
Image 7-54
5. Press
ENTER
A dialog box will be shown to confirm the lamp error removal. Confirm.
The lamp error logo is removed from the screen
7.6.6
Lamp runtime warning
What can be done ?
When the lamp has reached a predetermined runtime , a warning message will be displayed on the screen. The lamp runtime
warning can be set in a range from 30 to 200 hours. The runtime warning is displayed by default at 30 hours before end of lamp
lifetime.
How to set the lamp runtime warning?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select the
Lamp
item
3. Press
↓
to Pull down the
Lamp
menu
4. Use
↑
or
↓
to select
Runtime warning
Image 7-55
5. Press
ENTER
R59770079 BARCO ID H250/500 23/07/2007
67
Summary of Contents for iD H250
