background image

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.

 

Multimedia LCD Projector

 

September  2006

YK

No.0577E

CP-X505(EDX35N)

SERVICE MANUAL

Be sure to read this manual before servicing.  To assure safety from 

fi

 re, electric shock, injury, harmful 

radiation and materials, various measures are provided in this Hitachi Multimedia LCD Projector.  Be 
sure to read cautionary items described in the manual to maintain safety before servicing.

Caution

 

1. When replace the lamp, to avoid burns to your 

fi

 ngers.  The lamp becomes too hot.

2. Never touch the lamp bulb with a 

fi

 nger or anything else.  Never drop it or give it a shock.  They may 

cause bursting of the bulb.

3. This projector is provided with a high voltage circuit for the lamp.  Do not touch the electric parts of 

power unit (circuit) and power unit (ballast), after turn on the projector.

4. Do not touch the exhaust fan, during operation.
5. The LCD module assembly is likely to be damaged.  If replacing to the LCD LENS/PRISM assembly, 

do not hold the FPC of the LCD module assembly.

6. Use the cables which are included with the projector or speci

fi

 ed.

Service Warning

  

 

Warning

The technical information and parts shown in this 
manual are not to be used for: the development, 
design, production, storage or use of nuclear, chemical,   
biological or missile weapons or other weapons of 
mass destruction; or military purposes; or purposes that 
endanger global safety and peace. Moreover, do not 
sell, give, or export these items, or grant permission for 
use to parties with such objectives. Forward all inquiries 
to Hitachi Ltd.

1. Features ------------------------------------------------------ 2
2. Speci

fi

 cations ----------------------------------------------- 2

3.  Names of each part ---------------------------------------- 3
4. Adjustment --------------------------------------------------- 6
5. Troubleshooting ------------------------------------------ 13
6. Service points --------------------------------------------- 20
7. Wiring diagram 

-------------------------------------------- 38

8. Disassembly diagram ----------------------------------- 49
9. Replacement parts list ---------------------------------- 58
10.RS-232C communication ------------------------------- 59
11. Block  diagram --------------------------------------------- 72
12. Connector  connection  diagram ----------------------- 73
13.Basic circuit diagram ------------------------------------ 74

Contents 

Summary of Contents for CP-X505 series









































































































Reviews: