Barco iCon H600, Owner'S Manual

Page: 57 / 171

5. Setup
Image 5-36
How to configure the Server settings ?
1. Go to the server icon in the lower task bar of the desktop and click the right mouse button.
A menu is displayed
2. Select
Settings
A dialog box is displayed allowing to select different tabs
- Networking
- Dropzone, see Dropzone chapter
- Exchange
Networking settings
Image 5-37
• Port settings: it is advised to leave these settings in their default value.
• Mail to field : see mail configuration in the client software
• SNMP enable: allows to enable the SNMP control of the projector.
The
Enable write
option allows to enable the client to overwrite projector settings via
SNMP.
Unchecking this option means that projector settings will only be read.
Exchange settings
This tab allows to fill in the exchange parameters to allow scheduling of projector tasks.
These parameters should be configured by your local IT administrator
R5976821 BARCO ICON 15/03/2007 51