Barco iCon H600, Owner'S Manual

Page: 40 / 171

5. Setup
L3 and L1 light up red. After the initialization period L1 goes off.
Image 5-2
Image 5-3
Standby state : L3 is red
5.2 Starting up the projector
Starting up will only be possible after the initialization period i.e. when Led1 is off.
How to start up the projector ?
1. Press the Standby button on the RCU or on the local keypad.
9 0
EN T ER
M EN U B A C K
D I G I
Z O O M
PH A SE
PA U SE PI P
L O G O
Image 5-4
LED 1
LED 2
LED 3
Image 5-5
During startup Led3 becomes orange. When the projector becomes operational Led3 goes off and will only blink when receiving
IR commands from the remote control.
The iCon server source is displayed i.e. the Windows
TM
desktop is displayed.
Led2 blinking means that the projector is in standby while the Server is active
If the address setting is wrong the projector will not respond to the RCU, see the next step to set the address.
For more information on Server startup and shutdown see the
Setup
menu.
34 R5976821 BARCO ICON 15/03/2007