Barco iCon H600, Owner'S Manual

Page: 31 / 171

4. Installation
• DVI output & RS232 module
Image 4-14
Input section of the Icon : default configuration
The iCon is by default equipped as follows:
• Slot 1 : RGB input board
• Slot 2 : RGB input board
• Slot 3 : DVI input board
• Slot 4 : empty
• Slot 5 : DVI output board
4.5.3.2 Input boards specifications
RGB & Video analog input board
This board includes :
• RGBHV 5 BNC input :
RGBHV ampl = 0.7V ± 3dB
75
Ω terminated
• Composite video input :
1.0 Vpp ± 3dB
75
Ω terminated
No loop through
• S-Video input
R / PR G / Y B / PB Hs / Cs Vs VIDEO S-VIDEO
Image 4-15
RGB analog input board
DVI & Computer input board
This board includes :
• DVI single link digital input
even though the connector is of the DVI-I type, the analog part is not supported.
• Computer input
TTL sync : U
min
= 2.0V
RGB ampl = 0.7V ± 3dB
DVI
Image 4-16
DVI digital input board
DVI output board
This board includes :
R5976821 BARCO ICON 15/03/2007 25