Barco iCon H600, Owner'S Manual

Page: 119 / 171

8. Advanced
4. Use ↑ or ↓ to select
Full-screen synchronous representation
5. Press → to open the menu
6. Use ↑ or ↓ to select ON(enable)/OFF(disable)
7. Press ENTER
Image 8-75
8.7.2 Textbox
What can be done ?
The Textbox function allows to display or not the different textboxes used for instance for picture settings (contrast,...), it also affects
the source information windows (displayed in the right lower corner of the screen).
How to enable/disable the Textbox ?
1. Press MENU to activate the Tool bar
2. Press → to select the
Display setup
item
3. Press ↓ to Pull down the
Display setup
menu
4. Use ↑ or ↓ to select
Textbox
5. Press → to pull down the menu
6. Use ↓ or ↑ to enable/disable the textbox
Image 8-76
7. Press ENTER
8.7.3 Menu bar position
What can be done ?
The menu tool bar can be centered vertically , the range being from top of the screen to the middle of the screen. This can be useful
in applications where the top image content is not displayed.
How to center the menu ?
1. Press MENU to activate the Tool bar
2. Press → to select the
Display setup
item
3. Press ↓ to Pull down the
Display setup
menu
4. Use ↑ or ↓ to select
Menu bar position menu
R5976821 BARCO ICON 15/03/2007 113