Barco iCon H600, Owner'S Manual

Page: 53 / 171

5. Setup
The projector is now added to the list of projectors
Depending on the installed network (use of DHCP server or not), the IP address may be needed to be entered
or not.
For a point to point installation the projector’s IP address must be entered manually.
Check the operating system on the for the IP address, or contact your IT administrator.
How to add a projector group to the projector group list ?
1. Click on the white arrow
A menu is displayed, image 5-26
2. Click on the + sign of the projector group list
A dialog box is displayed
Image 5-28
3. Fill in the group name
4. Click OK to confirm or Cancel
The group is now added to the list of groups
How to add projectors to a group ?
1. Click on the projector to be added in the projector list
2. Drag the projector down to the projector group.
The projector is added to the group.
Adding a projector to a group can also be done by using the
“Copy + Paste”
method on the right mouse button
menu.
How to connect to a projector or group of projectors ?
1. Double click on the projector or group of projectors
R5976821 BARCO ICON 15/03/2007 47