3. Advanced commands
3.1.8
PiP add window
Description
Adds a PiP window .
To add a window following have to be specified:
•
source to be visualized in the window
•
size and position of the window
Command
Command [0]
\x12
Command [1]
\x0c
Data
strSource = C-String describing the layer and the source to be selected i.e. for example L1 RGB, L1 RGB (YUV), PC, L1 YUV
(RGB), DVI, L2 Video, L2 S-Video, HDSDI, SDI.
The source types are the names as displayed in the OSD source selection menu.
See the
Source selection
command for more details
For more info about the input configurations, see the projector’s Owner’s manual.
dwXsize = signed double word Xsize : describes the “width” of the window (x axis).
dwYsize = signed double word Ysize : describes the “height” of the window (y axis).
dwXPos = signed double word XPosition : describes the start position of the window (x axis).
dwYPos = signed double word YPosition : describes the start position of the window (y axis).
The acknowledge data (returned data) contains also an error code and its Unicode description (this is the
same error as the one displayed on the desktop).
Xsize, Ysize are given in “pixels”
106
R59770077 RS 232 SERIAL COMMUNICATIONS FOR ICON H250/400 16/02/2007
Summary of Contents for iCon H250
Page 1: ...RS 232 Serial Communications for iCon H250 400 User Manual Basic R59770077 00 16 02 2007...
Page 4: ......
Page 100: ...2 Basic commands 96 R59770077 RS 232 SERIAL COMMUNICATIONS FOR ICON H250 400 16 02 2007...
Page 122: ...3 Advanced commands 118 R59770077 RS 232 SERIAL COMMUNICATIONS FOR ICON H250 400 16 02 2007...
