6. Starting up
6.1
Switching ON the HDQ
How to switch on
1. Make sure that the HDQ is correctly installed.
2. Make sure that the right lens is installed for your application. See chapter "Lens selection", page 40.
3. Make sure that the lamp and lamp house are correctly installed.
4. Make sure the projector is correctly connected to the power net. See chapter "Connecting the projector with the power net", page
22.
5. Check if a video source is connected with the projector.
6. Check if the communicator touch panel is installed. Or, use Communicator via PC.
7. Press the power switch to switch ON the projector. As a result the projector starts up in standby. So, the lamp is OFF and the
dowser closed. No internal pattern is selected. The communicator touch panel starts its initialization procedure.
-
When ’0’ is visible, the projector is switched OFF.
-
When ’1’ is visible, the projector is switched ON.
8. Press the
STANDBY
button on the local keypad or use the Communicator Touch Panel to activate the lamp.
9. Press the
DOWSER
button on the local keypad or use the Communicator Touch Panel to open the dowser. As a result the applied
source will be displayed.
C
AUTION
:
See user’s guide of the Communicator Touch Panel to operate and control the HDQ.
R5905823 HDQ 4K35 30/11/2015
67
Summary of Contents for HDQ 4K35
