Barco Galaxy NW-7, User Manual

Page: 135 / 220

7. Advanced
7.9.2.1 Introduction
The Stereo display settings allow us to set what happens on the display side (output side) whereas the Input
stereo sync in the Image menu is done at the input of the projector
Mono Sources
When a mono source is connected to the projector, following settings can change the way it is displayed :
• Full screen synchronous representation, see "Full screen synchronous representation", page 133
• Stereo Mode, see "Stereo Mode ", page 132
Following illustrations give an overview on how (how = synchronous or asynchronous and which refresh rate) a mono source will be
displayed in function of its vertical refresh rate and for the different settings mentioned above. A mono source means that no stereo
sync is connected.
48
120
f(Hz)
FULL SCREEN SYNCHRONOUS MODE = off
ASYNC
@120Hz
STEREO MODE = always active
SOURCE = mono
In this case:
All the
mono sources
(for all the vertical refresh rates)
are displayed “
ASYNC
hroneously” at
120 Hz
.
Image 7-143
Mono source : Full screen synchronous representation OFF and Stereo Mode = Always Active
48
120
f(Hz)
FULL SCREEN SYNCHRONOUS MODE = off
ASYNC
@60Hz
STEREO MODE = auto
SOURCE = mono
Image 7-144
Mono source : Full screen synchronous representation OFF and Stereo Mode = Auto
48 60
96
120
SYNC SYNC ASYNC ASYNC ASYNC
f(Hz)
FULL SCREEN SYNCHRONOUS MODE = on
@120Hz @120Hz @120Hz @fsource @2Xfsource
STEREO MODE = always active
SOURCE = Mono
Image 7-145
Mono source : Full screen synchronous representation ON and Stereo Mode = Always Active
R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013 131